Make sure vehicle is off and parked at a leveled ground.
Please use the following video to remove your factory radio and climate control system.
After the factory radio is removed, please connect the main harness to the car side connectors. Our main harness can fit all LX 570 so you will find extra connectors not used on our harness and there will also be extra connectors not used on the factory side.
After connecting the main harness to the vehicle. Now we will connect the wifi and GPS antennas on the radio side. Then we move on to connecting USB harness, Line out harness and AV-IN harness on the radio side. If you have factory 360 camera or more than 1 backup camera, use the male RCA coming out of the grey connector on the harness to connect to a female RCA with tag "camera" on the AV-IN harness. If you only have single camera, use male RCA coming out from a white connector.
Now we will connect the main harness to the new radio. Make sure the two grey plugs are connected to the bottom decoder module, otherwise there will be either no sound or no AC control.
After we have made all the connections, we will turn on the vehicle and test for AC, audio, steering wheel control and cameras.
If there is no audio, please go to "console" app on the top, swipe left or right if you don't see it. Go to "Amp Info" on the left, then fine "Volume" or "Cur Vol" - turn the number up.
If you have no audio and no AC, after making sure your connections are correct and no pins bent, please contact us and we can replace the decoder module that is under the brain box.