- TPMS Installation and Software

Please use the link below to download the APK file for TPMS purchased from us. 

https://www.dropbox.com/s/rl5ivrnk0harc4t/T601_sp.apk?dl=0

Download the apk and put it in a flash drive. 

Connect flash drive to your radio.

Go to File Manager to access contents in flash drive.

Open T601.APK in the flash drive, it may ask you for permission to install the software, if that's the case, click "setting" in the dialog box, then toggle File Manager to on in the permission setting page, then hit back at lower left corner of the screen. 

Then wait for install to finish. 

Plug in receiver box, which is a black box with a USB plug at the end. 

Refer to each sensor's marking and install each sensor to corresponding wheel. 

Internal TPMS will require tires to be removed to install. 

External TPMS will replace nozzle caps. 

After that, go to unit's app page - open TPMS app - if you can read pressure on this page then installation is finished. 

You can change temperature and pressure units on this page. 

Pairing sensors to receiver:

Press learning on the left, then press "Match"

For Internal type, please inflate or deflate the tire when pairing.

For External type, please remove the sensor and reinstall it. 

When the sensor is paired, it will show the sensor ID and prompt success.